ENERVAC Air/Gas Dryers and Filters are designed for the removal of moisture from process air and gases. This eliminates condensation, freeze-up, and moisture corrosion thus protecting pneumatic instruments and extending the life of pneumatic tools.
The superior reliability of every ENERVAC Air/Gas Dryers and Filters begins with extensive functional testing. Our highly skilled technicians follow a comprehensive testing program to ensure only the most reliable, high performance Air/Gas Dryers and Filters display the ENERVAC name.
Air & Gas Dryers
Heat Reactivated Dryer (E2DA-2E)
- Electric heat reactivated type
- Simplified design.
- -40°F (-40°C) outlet pressure dewpoint or better.
- Ideal for flowrates from 60 to 3500 SCFM (100 to 6000 m3/h).
Heat Reactivated Dryer, Atmopshere Blower Type (E2DB-3E)
- Atmospheric blower type, heat reactivated.
- Dewpoint better than -70°F (-56°C).
- Stainless steel desiccant bed screens.
- Ideal for flowrates from 200 to over 10,000 SCFM (340 to >17,000 m3/h).
Heat Reactivated Closed Loop Dryer (E2DA-5E)
- Heat reactivated closed loop, zero purge loss.
- No process gas or air loss.
- Freeze-proof automatic water ejector trap.
- Ideal for flowrates from 200 to over 10,000 SCFM (340 to >17,000 m3/h).
Heatless Type Dryer (E2DD-7H)
- Heatless regeneration.
- Dewpoints down to -100°F (-73°C) possible.
- Lower initial installation cost.
- Ideal for flowrates from 5 SCFM (8 m3/h).
High Pressure Air Dryer (E2DC)
- Design pressures up to 3,600 psig (25 MPag).
- Moisture content less than 5 ppmv.
- Available 2-stage pre-filter drain system.
- PLC controlled with available operator interface terminal.
Mobile Breathing Air System (E770B)
- Purges clean, dry air into a confined transformer for maintenance personnel.
- Removes and monitors Carbon Monoxide.
- Provides breathable air at atmospheric pressure.
- Utilizes an air dryer to provide clean, dry air.
