Lubrication Systems

• Pressure lubrication equipment for heavy industry.
• Complete oil circulating and filtering system.
• Provides longer life for lubricated machinery.
• Lower maintenance and replacement expenses.

• Provides a complete lubricating system for individual mill stands or drives.
• Large reservoir provides adequate retention time.
• Compact units occupy very little floor space.
• Extensively used in the paper, metal, rubber, textile, blower and fan industries.

• Compact flow indicator permits side by side installation.
• Allows checking at one convenient location.
• Used where discharge points are numerous, inaccessible or elevated.
• Suitable for dark oils.

Dirty Oil Receiving Tanks (E360A)

• Oil receiving tank for any oil circulating and filtering system.
• Tank serves as a contamination trap.
• Controlled flow pattern settles out solids and free water.
• Various sizes and configurations available.

Twin Receiving and Storage Tanks (E363)

• Twin receiving and storage tanks for oils and process liquids.
• Dual configuration allows settling in one side and process circulation in the other side.
• Clean fluid storage for more than one type of liquid.
• Various sizes and configurations available.

Receiving and Storage Tanks (E373)

• Receiving and storage tanks for oils and process liquids.
• Acts as a dirty oil receiving tank, a precipitation tank and a storage tank.
• Tank accommodates gravity return of oil from bearings and gears.
• Various sizes and configurations available.

Pressure Tanks (E361A)

• Pressure tank feeds oil under pressure to bearings, gears and pinions.
• ASME Code designed, inspected and labelled.
• Oil level gauge standard on all units.
• Complete range of sizes available from 35 to 600 gallon capacity (130 to 2270 litres).

Storage Indicator (E809A)

• Shows the approximate level of liquids in storage tanks.
• Can be used with rectangular or cylindrical tanks.
• Gallon/Litre calibration available.
• Available in local tank mount or remote wall mount.

Float Suctions (E280A)

• Draws liquids from the top instead of the bottom of an oil tank.
• Prevents any sludge or sediment from being drawn into the pipe line.
• Can be installed in above or underground tanks.
• Various sizes available to suit almost any tank.

Automatic Water Ejector (E206A)

• Automatically ejects water that has settled in an oil receiving tank.
• Used extensively in steel and paper mills where water accumulates in the oil.
• May be used with ENERVAC’s line of oil storage tanks.
• Parts are Cad plated to prevent corrosion.

• Wide media selectivity – interchangeable cartridges.
• High dirt loading capacity.
• Assures maximum, continuous clarity.
• ASME Code designed and labelled.