top of page

SF6 Gas Recovery Unit (GRU-8)

Whether you are looking for fast processing speed, better than 99.9% SF6 recovery, a 100% oil-less system, unlimited storage capacity, easy single valve operation, or portability, you will find it with the Enervac GRU-8. We developed the GRU-8 for our customers who found they needed more storage and recovery capacity than smaller handcart mounted units, but without the bulk and high price of a large skid or trailer mounted unit.

SF6 Gas Recovery Unit (GRU-8)


  • Recover and purify SF6

  • Purifies recovered SF6 twice during regular routine

  • Purification of SF6 (removes particles, moisture, and SF6 decomposition products)

  • Evacuate air and moisture prior to filling

  • Consolidate SF6 cylinders

  • Store SF6 in liquid state (optional onboard storage)

  • Regulated filling of SF6 equipment


  • Easy to operate – single valve to switch operating modes

  • High pressure, direct-drive oil-less compressor with 1000:1 compression ratio (capable of 1000psi – 69 bar)

  • Capable of liquid SF6 storage

  • Purifies, dries and filters to 0.1 microns during recovery and re-pressurization

  • Filters are easily changed without disconnecting any tubing or using any special tools

  • Mounted on a cart with casters and rack for storage up to three SF6 storage bottles (total onboard storage up to 350lbs/160kg) – 660lbs/300kg with optional storage tank

  • Auxiliary connection allows for infinitely expandable storage through use of external tanks

  • Comes complete with 9.8ft / 3m hoses and power cable

  • Colour change moisture indicator to monitor moisture in gas

bottom of page