Rental Equipment

We rent out our products with the same service and expectations as our products that are for sale.

For more information contact sales@enervac.com.

SF6 Gas Recovery Unit (GRU-4)

The cart is ideally suited for servicing small volume SF6 equipment. All processes required for servicing SF6 equipment can be performed including gas removal, temporary storage, contaminant filtration to 0.1 micron, gas purification and drying, equipment evacuation and equipment re-pressurization. The cart is also ideally suited for consolidating partially-used SF6 bottles into one bottle.

GRU-4 SF6 GasRecoveryUnit.png

GRU-7 Gas Recovery Unit

We developed the GRU-7 for our customers who found they needed more storage and recovery capacity than smaller handcart mounted units, but without the bulk and high price of a large skid or trailer-mounted unit. The GRU-7 capable of  gas transfer rates up to 55lbs/25Kgs per hour. Has 2 bottle connections with CGA590 adapters on the hoses.

GRU-7_edited.png

SF6 Gas Recovery Unit (GRU-8)

We've developed the GRU-8 for our customers who found they needed more storage and recovery capacity than smaller handcart mounted units. The GRU-8 is available without the bulk and high price of a large skid or trailer mounted unit. The GRU-8 is 240v-3ph, has 4 castors and can transfer up to 110 lbs of SF6 per hour.  It comes with a 300L storage tank, 40 m3/hour vacuum pump, 6 m3/hour vacuum compressor and built-in hygrometer.

GRU-8 (1)_edited.png

SF6 Gas Transfer Unit (GTU)

Designed as a low cost solution to recovering, consolidating and transferring Sulfur Hexaflouride, the GTU is an essential tool for servicing small volume SF6 equipment. All processes required for servicing SF6 equipment can be performed including gas removal, contamination filtration, gas purification, gas drying and manual equipment re-pressurization. The GTU is ideally suited for consolidating partially used SF6 bottles into one bottle or recovering left over gas from larger carts.

GTU_edited.png

E736A SF6 System

The E736A SF6 System is designed to transfer larger volumes of SF6 gas.  It comes with and easy-to-use HMI touchscreen control system, 8-cylinder storage system with built-in weigh scale, Haug VTUGX45/26 SF6 compressor, 60m3/hour vacuum pump and 35m3/hour vacuum compressor. 480v-3ph-60Hz.

E736A-Enervac-Digest-Photo.png

SF6 Analyzer

Ultra-fast digital Infrared SF6 Analyzer can test for H2O, SO2 and SF6 Purity.  It comes with auto-pump back feature which pumps the SF6 sample back into the circuit breaker and eliminates any SF6 escaping to atmosphere.  Includes a 6M sample hose with DN8 and DN20 adaptors.

Ultrafast-Infra-Red-SF6-Analysis-–-Zerowaste®-Rapide.jpg

E859C Mini Dehydrator

This lightweight Mini Dehydrator cart is the most cost effective way to extend the life of hydraulic and lubrication fluids. This air- cooled unit will dehydrate, filter and de- aerate fluids.
The Mini-Dehydrator is ideally suited for small volumes up to 200 US Gallons (750L) of hydraulic fluids, lubricating oils, turbine oils, transmission fluids, quenching oils and synthetic fluids.

E859C - mini dehydrator_edited.png

E865C Portable Transformer Oil Purifier Filter Degasifier

This lightweight Mini Degasifier cart uses the latest high vacuum technology to filter, dehydrate and degasify insulating and dielectric fluids. The unit is ideally suited for processing oil in pole mounted transformers, bushings, conservators, individual barrels of oil and other similar small fluid amounts.

E865C Mini Degasifier_edited.png

E865A 1800 GPH Degasifier

ENERVAC’s (transformer oil purifier) high vacuum process is used for the dehydration and degasification of electrical insulating liquids including transformer oils, polybutene and silicone fluids, to increase and maintain their dielectric strength. The processing includes the removal of free and soluble water, dissolved air and gases and particulate matter. It is available to rent as a skid or mounted in a modified 20ft shipping container.

E865A.PNG

Vacuum Dehydration Oil Purification System (VDOPS)

Vacuum Dehydration Oil Purification Systems (VDOPS) – to remove all water (free, emulsified, and dissolved), entrained gases, and particulate contamination to meet or exceed ISO 16/14/11 cleanliness levels.  Ideal for use with a wide range of hydraulic and lubrication oils. Available in 20 and 50 GPM Systems.

VDOPS_1.png

EHV-2000 Transformer Oil Purifier

600 GPH flow rate (2,000 LPH) build on a lifting frame with metal roof and heavy-duty roll-up canvass cover. This rental unit is 480v-3ph-60Hz and includes 32kW electric heater, PLC control system, Busch RA165/WV500 vacuuum package and an in-line digital hygrometer.

IMG_2261.jpg

Enervac ENERDry Transformer Dry Out System

Transformers and its paper insulation have a primary enemy - Water. Water can be removed from a transformer using a vacuum dehydration process. Transformers with high moisture levels can now be dried to acceptable levels by using this unattended unit without taking the transformer out of service.

Enerdry_edited.png

E575A Fullers Earth System

Fuller’s Earth oil filters are used for removal of acids and soluble surface acting contaminants by adsorption. Skid Mounted Fullers Earth Towers – 120V-1ph-60Hz.  Fuller’s Earth is used for removal of acids and soluble surface acting contaminants by adsorption.

E575 A.png